Saturday, February 26, 2011
October Removial of honey super
Jon, Shane, Dad (Jack), Ben, and I preparing to remove our first super. This is the Lewis Hive, due to the fact that we got it from the Lewis'. We got this hive late in the season and are concerned with its strength it is very hardy but I hope it can recover. It may need re-queened this summer.
Setting up the Hive Stands
Setting our hive stands next to the Lyman Farms alfalfa fields. Preparing for our new bees to show up.
My turn with the drill steel to knock down the sides, Jon testing the stands, now if he could just make honey!
Great hive stands from our original bees in Colorado we dug the holes manually on these two, after these we used a power post-hole digger.
January Inspection
In contrast to our February Inspection I have some pictures of our January Inspection. Bruce Lyman was kind enough to make sure we could get into the bees and once we did with the sun shining we saw some very encouraging signs. Many of the bees were taking cleansing flights and the undertakers were hard at work you can see the amount of dead bees that were cleaned from the hives. The insulation was in good shape although I needed to cut a hole in it to allow it to dry.
The insulation on the hives have held up well through the winter so far.
Busy undertaker bees cleaning the hives.
The insulation on the hives have held up well through the winter so far.
Busy undertaker bees cleaning the hives.
Another look at the hives as well as a small pile of bees I swept off of the ledge in front of the door.
February 26 Inspection
Jon, Shane, and I traveled down to the Bees this morning to check on their condition. The wrapping we put in place has taken quite a beating but is in place still and hopefully keeping our girls warm. I did notice a bit of condensation inside the plastic and cut holes in the wrap to allow them to dry.
Subscribe to:
Posts (Atom)






